Create
a destination save file on your AS/400. If you do
not, the restore process will not recognize the file
as being in the SAVF format
Note:
You can name the file ENM400, or whatever you prefer.
But if you currently have Expedite Notification Manager
for AS/400 installed, then you probably already have
this library name in use, and you should not overwrite
it.
a.
Enter
CRTSAVF and then press F4 (prompt).
b.
Enter the
save file name, the library name, and press Enter.
Note:
The LIBRARY name must be an existing library in your
system. If it is not, use CRTLIB command to
create it. For example: CRTLIB MYENMLIB
The following is an example
of the Create Save File screen.
-----------------------------------------------------------------------------------------------------------
Create Save File (CRTSAVF)
Type choices, press Enter.
Save file . . . . . > ENM400 Name
Library . . . . . . > MYENMLIB Name, *CURLIB
Text 'description'. . > 'Expedite Notification Manager
for AS/400 V1R1
program and files'
-----------------------------------------------------------------------------------------------------------
a.
Open
an FTP session from the PC to your AS/400 and use
the FTP binary subcommand to set the mode to BINARY.
b.
Make sure the current
library is the library where the SAVF file was created.
If it is not, use the FTP cd subcommand (cd MYENMLIB)
to change the current library.
Note:
When you use the dir command to list a library, the
mode is changed automatically to ASCII. If you set
binary mode and then entered dir, the mode is reset.
You must issue the binary subcommand again to set
the mode back to binary.
c.
Use
the FTP put subcommand to transfer the file. Make
sure you use fully qualified file names).
put enm400 [destination_AS/400_filename]
2.
Download
the file from the Web to a PC and unzip the file.
For example, if using pkzip, enter:
pkunzip enm400.zip
3.
Use FTP
to send it from the PC to your AS/400, as follows:
4.
Restore
the Expedite Notification Manager for AS/400 1.1 library
by issuing the RSTLIB command:
RSTLIB SAVLIB(ENM400) DEV(*SAVF) SAVF(library/fileid)
RSTLIB(ENM400)
Notes:
1.
ENM400
contains the programs and files.
2.
The
fully qualified name of the save file you created
in step 1 is library/fileid.
3.
The
SAVLIB parameter is the name of the library where
the files were originally saved, and these parameters
are required. The RSTLIB parameter is the name of
the destination library. The RSTLIB names shown here
are suggested names, and you may choose to use different
names in your environment.
